Coated in film firstly,and then reinforced with wooden for outer packing
45 working days after received your payment
10 sets per month
Detailed Product Description
PVC Plastic Edge Band Extrusion Machinery For Furniture Edgeband , Edge Banding Single Screw Extruder
Producing Pvc Edge Band Profile
Single Screw Extruder
PVC plastic edge band extrusion machinery for furniture edgeband , edge banding single screw extruder
PVC plastic edge band extrusion machinery for furniture edgeband , edge banding single screw extruder is used to produce PVC edge band.
Introduction of PVC edge banding single screw extruder machine
Base on the perfect combination of the European advanced technology, this production line has already been developed successfully for producing some latest models of cars seal strip and furniture profiles. Matched with the professional screw design, the screw is featured with low shearing; low melt temperature and high and stable output.
PVC plastic edge band extrusion machinery for furniture edgeband , edge banding single screw extruder machinery list:
1. SJ-45/28 single screw extruder
Body of screw and barrel: 38CrMoALA (through the process of nitriding).
Nitrogenous thickness of screw is 0.5-0.7mm, and the nitrogenous hardness is over HV 940, the roughness of inner wall is Ra<=0.8 um.
Nitrogenous thickness of barrel is 0.5-0.7mm, and the nitrogenous hardness is over HV 940, the roughness of inner wall is Ra<=1.6um.
Screw diameter :45mm Screw rotating number 1-45 rmp
Hard gears face reducer; gear wheel is made of 20CrMoTi, and trough the process of nitriding. 38CrMoALA material of distributing box gear, though the process of nitriding, the axis is 40Cr as material.
Motor of main machine adopt the frequency conversion, the power is 7.5kw.
Heating power of barrel is 9kw
Cooling means of barrel: fan blower. The blower power is180w*3. Cooling means of barrel adopts the core circulating means. The barrel adopts the chinaware heating zone, wrapped with the stainless steel protection cover. Three sections heating; the die, contactor, the concourse core have 3 heating sections.
The main motor and the feeding system all adopt Japan ABB inverter speed adjustor. Japan RKC temperature controlling instrument, and the error is controlled in the range of 1oC.French Schneider contactor
2. Mould 3 sets
Specification: 22mm, 30mm, 40mm
3. Vacuum Calibration Table
4. Back printing glue unit 1 set
5. Hauling-off Machine roller model
6. Winding unit
7. Color printing machine
Technology and Service:
1. Seller supply full set of technical document, cutter and other full document (write in English).
2. Seller supply training for buyer’s staff until buyer can produce the eligible production independently.
3. Seller is responsible for installing, testing, adjusting and debugging the machines in buyer’s factory.
4. Buyer should pay the expense for our engineers including for our engineer including round-
way tickets, inland traffic, lodging and boarding fee when the machine is installed, tested and maintained.
5. Seller will go to install machines after the machine is arrived at buyer and buyer will have prepared all
conditions (including power, water, compress air, tools and materials for producing pipe, etc) for installing
and testing these machines. Buyer should pay 60USD/day.
6. When installing,people of both sides cooperate well and carefully,buyer supplies convenient working
condition,any problem, should discuss peacefully and kindly.
7. Buyer supply proper working tools, equipments and other conditions.
8. The expense including the accommodation and materials of the trial-
run the machine for testing and other expenses(electric, water, air and worker) will be on seller’s account,
if the buyer or their representatives do the inspection of the machines before shipment.
9. Guarantee period: 14 months after shipment (the date of B/L)